Hi-Lift

36" UTV Model. 7000 lb. Capacity (4660 Rated Capacity). Less than 30 lbs. Winch-Clamp-Spreader Attachment.

48" Cast & Steel Model, 7000 lb. Capacity (4660 Rated Capacity). Black Jack with a Red Handle.

48" All Cast Model, 7000 lb. Capacity (4660 Rated Capacity). Red Jack with a Black Handle.

60" All Cast Model. 7000 lb. Capacity (4660 Rated Capacity). Red Jack with a Black Handle.

60" PATRIOT Edition Model. 7000 lb. Capacity (4660 Rated Capacity). Red, White & Blue Design. Includes Handle-Keeper.

Mount Your Hi-Lift Jack To Tube Bumpers, Bull Bars, Roll Cages Or Roof Racks

Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1” up to 3” in diameter.

The TM-750 is designed for round tube from 2-3” in diameter that will work on most vehicle bull bars and roll cages. The TM-700 is designed for round tube from 1-2” in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.

Manufactured of 6061-T6 structural aluminum and stainless steel hardware, these mounts allow you to securely store your Hi-Lift® jack in locations that are ideal for easy removal when needed.

Two Sizes Offered:

TM-700 is adjustable for tubing 1″-2″ in diameter.
TM-750 is adjustable for tubing 2″-3″ in diameter.
Manufactured of 6061-T6 structural aluminum with stainless steel hardware. No drilling required.

Eliminate Jack “Rattling” During Transportation And Storage

The rugged polyurethane Handle-Keeper holds the Hi-Lift® handle to the upright steel bar, keeping it in place when not in use and eliminating “rattling” during transportation and storage.

The Handle-Keeper easily slips on and off over the Hi-Lift® Top Clamp-Clevis to allow for proper use of the Hi-Lift® Jack. The unique design eliminates the need to remove the Top Clamp-Clevis for putting on or taking off the Handle-Keeper.

Handle-Keeper Features & Specifications:

• Fits all models of Hi-Lift® brand jacks
• Available in two colors – Black (HK-B) & Red (HK-R)

Mount your Hi-Lift within easy reach on the hood of your Jeep Gladiator or Wrangler JL/JK/TJ/CJ/YJ. Aluminum design. No drilling required.

Conveniently mount and store your Hi-Lift® Jack on the bed rail of a Jeep Gladiator.

Installation is simple using the Jeep Gladiator OEM bed rail system.*

No drilling required.

Constructed of 6061-T6 anodized structural aluminum for strength, durability, and a clean look. Adaptable for use of “quick fist” type clamps for mounting of tools and equipment, such as an axe or shovel.

Added Feature: This item is adaptable for use of Quick Fist Model #10010 clamps for mounting of additional tools and equipment such as an axe or shovel. Attach Quick Fist clamps to JGBM-100 with (2) #10-32 x 3/4″ flat head socket cap countersunk screws. (Quick Fist mounts and screws are not included with this item.)

Looking for a more secure storage solution? This item is compatible with our Hood Mount Locking Knob.

*Note: Bed rails are not standard equipment on all Jeep Gladiator models.

Lift Directly From The Wheel – Plastic Bumpers And Extreme Lift-Kits Are No Longer A Problem.

Many trucks and SUV’s have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.

Lift-Mate Features & Specifications:

• Lift Capacity: 5000 lbs. (2273 kg)
• Rubber-Coated hooks to protect the wheel
• Rubber pad for protecting the tire and wheel

Alleviate Jack Sinkage On Soft Ground

Increase your support surface area and make the original power tool even more versatile!

• Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.
• Convenient to use, easy to store.
• Rugged construction meets Hi-Lift Jack specifications for strength & durability.
• Can be used with standard Hi-Lift Jack models*.

*Note: This item is not compatible with the First Responder Jack by Hi-Lift.

New for 2017 this unit is designed to mount and secure your Hi-Lift® Jack horizontally on the inside rear of a Jeep Wrangler JK.  No drilling required, mounts directly to the factory roll cage tubing.  6061-T6 structural and anodized aluminum for strength, durability, and a clean look.  Provides secure inside storage with easy access when needed.

*Compatible with other Jeep Wrangler models with top removed.

New, Improved Option To Protect The Essential Components Of Your Hi-Lift Jack

Model #: RGJC

Keep your Hi-Lift® Jack Running Gear (or lifting assembly) protected from mud, dirt and grime. The Hi-Lift® Running Gear Jack Cover is designed to greatly reduce the amount of dirt and mud that can accumulate in the working mechanism of the Hi-Lift® Jack.

• Easy On, Easy Off Zipper Design
• Made with Marine Grade Vinyl (UV Protected, Mold and Mildew Resistant)
• Features carbon fiber embossing and PVC Hi-Lift logo patch
• Fits all Hi-Lift Jack Models

The Running Gear Jack Cover (Part# RGJC) is a substantial improvement over, and replaces, the Neoprene Jack Cover (Part# NJC).

Improved Features:

• High quality zipper
• Stronger material resists fading and tearing
• Improved fit

Conveniently mount and store your Hi-Lift® Jack on the bed rail of a Toyota Tacoma (2005–Present)

Installation is simple using the OEM Toyota Tacoma bed rail system.

No drilling required.

Constructed of 6061-T6 anodized structural aluminum for strength, durability, and a clean look.

Added Feature: This item is adaptable for use of Quick Fist Model #10010 clamps for mounting of additional tools and equipment such as an axe or shovel. Attach Quick Fist clamps to TTBM-1000 with (2) #10-32 x 3/4″ flat head socket cap countersunk screws. (Quick Fist mounts and screws are not included with this item.)

Looking for a more secure storage solution? This item is compatible with our Hood Mount Locking Knob.

*Note: Bed rails are not standard equipment on all Toyota Tacoma models.

Secure Your Hi-Lift Jack!

The Versatile Locking Knob allows you to secure your Hi-Lift jack with a quality key-locking knob on your 4XRAC, LOC-RAC, or Hi-Lift Adjustable Tube Mounts.

• Fits 1/2 inch bolt, 13 thread
• Pair of keys included
• Easy to install

Note: This product is not compatible with Hi-Lift Hood Mounts or Roll Cage Mount. Please check out our Hood Mount Locking Knob.