Metalcloak

The MetalCloak ARB Twin Compressor Mount is engineered to provide a mounting location for the ARB twin compressor for the Jeep JK Wrangler.

Features Include:
Designed for the Jeep JK Wrangler
Made of 11GA Hot Rolled Steel
Precision Fit
CAD Designed
CNC Formed
Gold Zinc Chromate Finish
Quick & Easy to Install
Made in the USA
The MetalCloak twin compressor mount is laser cut from strong 11GA hot rolled steel and is CNC formed for a perfect fit. The bracket provides a sturdy mounting location for the ARB twin compressor or a similar sized air compressor unit. The mount is finished in MetalCloak’s signature gold zinc for a long lasting finish and to protect it against the elements.

Note: Bracket does not interfere with any of your Jeep’s systems.

Note: Designed to work in unison with the MetalCloak Vacuum Pump Relocation Bracket or the MetalCloak sPod Mount & Vacuum Pump Relocation Kit.

The MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock (MetalCloakPatents.com) provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.
6Pak Shock Features:

Stroke: 13"
Compressed Size Eye to Eye: 12 1/4"
Extended Length Eye to Eye: 25 1/4"
Dual Opposing nitrogen charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality
Made in the USA
Each shock is dyno-tested and mounting ends are pre-set for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

The MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock (MetalCloakPatents.com) provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.
6Pak Shock Features:

Stroke: 13"
Compressed Size Eye to Eye: 12 1/4"
Extended Length Eye to Eye: 25 1/4"
Dual Opposing nitrogen charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality
Made in the USA
Each shock is dyno-tested and mounting ends are pre-set for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

The MetalCloak JK Jeep Wrangler 6Pak Front Long Travel, Compact Body, Shock (MetalCloakPatents.com) provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.
6Pak Shock Features:

Stroke: 15"
Compressed Size Eye to Eye: 13 1/4"
Extended Length Eye to Eye: 28 1/4"
Dual Opposing Nitrogen Charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality
Made in the USA
Each shock is dyno-tested and mounting ends are pre-set for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

The MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock (MetalCloakPatents.com) provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.
6Pak Shock Features:

Stroke: 15"
Compressed Size Eye to Eye: 13 1/4"
Extended Length Eye to Eye: 28 1/4"
Dual Opposing nitrogen charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality
Made in the USA
Each shock is dyno-tested and mounting ends are pre-set for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

The MetalCloak JK Jeep Wrangler 6Pak Rear Long Travel, Compact Body, Shock (MetalCloakPatents.com) provides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.
6Pak Shock Features:

Stroke: 15"
Compressed Size Eye to Eye: 13 1/4"
Extended Length Eye to Eye: 28 1/4"
Dual Opposing nitrogen charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality
Made in the USA
Each shock is dyno-tested and mounting ends are pre-set for easy installation. Shocks ship with the JK-specific specs so you can be confident that your shocks are ready for your Jeep JK Wrangler.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

The 46" Crawler Cap for the JK/JL Wrangler and JT Gladiator Frame-Built Bumper System adds another level of protection and style.

Measuring 46" from end to end this Crawler Cap gives you clean lines and awesome approach angles.

MetalCloak. Strength through simplicity.

Note: As of May 2014 MetalCloak Updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible. Please contact MetalCloak at (916) 631-8071 to confirm.

The 56" Light Cap for the JK/JL Wrangler and JT Gladiator Frame-Built Bumper System adds another level of protection and style - with lights!

Measuring 56" from end to end the this Crawler Cap uses your stock lights and gives you clean lines and plenty of coverage.

MetalCloak. Strength through simplicity.

Note: As of May 2014 MetalCloak Updated the JK Wrangler Frame-Built Bumper System. If you purchased your bumper prior to this date, these products may not be compatible.

The MetalCloak 6Pak Front Shock Mount Kit, for the JK Wrangler, is a effective and simple bolt-on component that allows you to mount the revolutionary Long-Travel 6Pak Shocks into the stock shock towers of your Jeep.

6Pak Front Shock Mount Kit for JK Wrangler Features:

Driver & Passenger 7GA Steel Upper Shock Mount Brackets
Lower Shock Mount Spacers
Gold Zinc Plated Protection
Brake Line Bracket Relocation Bolts
All Necessary Hardware for Installation
Made in the USA
Never before was it possible to "BOLT ON" 15in travel shocks until now; 6Pak shocks changed it all. The Shock mount kit provides the additional clearance needed to position up to 15" travel 6Pak shocks into your Jeep with ease. Simply bolt in the strong 7ga steel brackets into the factory location and install the shocks.

The 6Pak Rear Shock Mount & Clearance Kit, JK Wrangler allows for the easy installation of all sizes of the 6Pak Long Travel Shocks and increases ground clearance.

Features:

Driver & Passenger 7GA Steel Lower Shock Mount Brackets
Lower Shock Mount Spacers
Upper Rear Bar Pin Eliminators
Gold Zinc Plated Protection
Additional Shock Body Clearance
Additional Ground Clearance
All Necessary Hardware for Installation
Made in the USA
Bolt-In longer 6Pak shocks AND gain 3" of ground clearance; This package allows the use of 6Pak shocks and eliminates the typical shock mounts that can limit travel. When used this provides clearance for the shock bodies and also allows trimming of the factory mounts providing up to an additional 3in of ground clearance.

The 2-Door Pro Rack is a most capable carrying system available for the Jeep Wrangler. The only rack designed so the hardtop may be taken off or on without removing. The highest payload, strength, rigidity, and stability as well as an assortment of unique modifications are feature characteristics of this cargo management system.

Pro Rack Features Include:
Remove Hard Top Without Removing Rack
Heavy Duty 2" Tubular Exo-Skeleton Rack System
One Piece Design Front Hoop
Front Hoop Weld on Grab Handles
2-Door Pro Roof Rails
CNC Clamps with Threaded Bolt Holes
Specific Engineered Tube Bend for a Stronger & Sturdier Support Structure
Two Piece Design Rear Hoop
1/4" Steel Frame Mounts
7GA Steel Hard Top Rear Adapter Brackets
Two Piece NVH Hi-Durometer Urethane Bushings
Allows for Freedom Top Removal
Industrial Grade Corrosion Resistant Hardware
Protection for Windshield Assembly
Protection for the Rear Corners
Low Profile Design
Bolts Directly to Factory Locations
No Drilling or Body Modifications Required
850lbs Static Load Capacity
375lbs Dynamic Load Capacity
Accessories Mount Directly to Rack System
Front Hoop Mount Ready for KMS Kat-Walk
Works with the Mod Rack Stealth & Mod Rack Expanded Platforms
Finished in Black Texture Powdercoat
Quick & Easy Installation
Made in the USA
The front light bar hoop mount is a one-piece design and is made of strong 2” diameter steel tube. The hoop is a solid anchoring point for accessories and provides protection for the window assembly.

The light bar pro front hoop comes with industrial grade corrosion resistant hardware, is finished in our signature black powdercoat to protect it against the elements, and has convenient integrated 1” tube handles for additional safety and provide easier access to the kat-walk accessory and the roof rack.

The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road. The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).

The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.

The rear hoop mount is a two-piece design and is made of strong 2” diameter steel tube and the billet ends are secured with industrial grade corrosion resistant hardware. The rear hoop is black powdercoated to protect the hoop from the elements and uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.

The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact, and allows enough room to remove the freedom top without having to remove the rack system.

The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.

Note: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.

Note: The Mod Rack Stealth Platform (R55060) are sold separately.

Note: The front hoop Kat-Walk (R60255) is sold separately.

The 4-Door Pro Rack is a most capable carrying system available for the Jeep Wrangler. The only rack Designed so the hardtop may be taken off or on without removing. The Highest payload, strength, rigidity, and stability as well as an assortment of unique modifications are feature characteristics of this cargo management system.

Pro Rack Features Include:
Remove Hard Top Without Removing Rack
Heavy Duty 2" Tubular Exo-Skeleton Rack System
One Piece Design Front Hoop
Front Hoop Weld on Grab Handles
4-Door Pro Roof Rails
CNC Clamps with Threaded Bolt Holes
Specific Engineered Tube Bend for a Stronger & Sturdier Support Structure
Two Piece Design Rear Hoop
1/4" Steel Frame Mounts
7GA Steel Hard Top Rear Adapter Brackets
Two Piece NVH Hi-Durometer Urethane Bushings
Allows for Freedom Top Removal
Industrial Grade Corrosion Resistant Hardware
Protection for Windshield Assembly
Protection for the Rear Corners
Low Profile Design
Bolts Directly to Factory Locations
No Drilling or Body Modifications Required
850lbs Static Load Capacity
375lbs Dynamic Load Capacity
Accessories Mount Directly to Rack System
Front Hoop Mount Ready for KMS Kat-Walk
Works with the Mod Rack Stealth & Mod Rack Expanded Platforms
Finished in Black Texture Powdercoat
Quick & Easy Installation
Made in the USA
The front light bar hoop mount is a one-piece design and is made of strong 2” diameter steel tube. The hoop is a solid anchoring point for accessories and provides protection for the window assembly.

The light bar pro front hoop comes with industrial grade corrosion resistant hardware, is finished in our signature black powdercoat to protect it against the elements, and has convenient integrated 1” tube handles for additional safety and provide easier access to the kat-walk accessory and the roof rack.

The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road. The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).

The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.

The rear hoop mount is a two-piece design and is made of strong 2” diameter steel tube and the billet ends are secured with industrial grade corrosion resistant hardware. The rear hoop is black powdercoated to protect the hoop from the elements and uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.

The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact, and allows enough room to remove the freedom top without having to remove the rack system.

The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.

Note: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.

Note: The Mod Rack Stealth (R55060) and the Mod Rack Expanded (R55075) Platforms are sold separately.

Note: The front hoop Kat-Walk (R60255) is sold separately.

Our top of the line mid-arm Game Changing Suspension System outperforms all others, featuring patented technology available nowhere else.

A perfect kit so you can enjoy your Jeep with a lift now, with opportunity to build on for the future. This is a lower lift height for mild off-road use, made with top level parts. Featuring patented Technology available nowhere else.

Our top of the line mid-arm Game Changing Suspension System outperforms all others, featuring patented technology available nowhere else.

A perfect kit so you can enjoy your Jeep with a lift now, with opportunity to build on for the future. This is a lower lift height for mild off-road use, made with top level parts. Featuring patented Technology available nowhere else.

The Jeep JK Wrangler 4-Link Long Arm Compound Suspension Systemis the only 4-Link Long Arm system that combines technology with the Patent Pending DB3 Rear Geometry correction brackets that give the best control arm angle available at this lift height. (metalcloakpatents.com)

Our JK 4.5" Game Changer Suspension comes with everything you need to properly provide 4.5" of lift to your Jeep including a complete HD Hi-Steer Kit! Metalcloak's patented technology is unprecedented performance.

The Jeep JK Wrangler Lock-N-Load Long Arm Compound Suspension is the only Long Arm system that provides bind-free front radius arms, along with the Patent Pending DB3 Rear Geometry correction brackets that give the best control arm angle available at this lift height.

The Jeep JK Wrangler 4-Link Long Arm Compound Suspension Systemis the only 4-Link Long Arm system that combines technology with the Patent Pending DB3 Rear Geometry correction brackets that give the best control arm angle available at this lift height.